51
5
System Settings
You can set up system information following instructions on the Local interface or web interface. This
section introduces the web interface instructions. The Local interface is similar and would not be
elaborated here.
Some functions can only be configured on the Local interface. The actual interface shall prevail.
Some functions are not used in actual operations, so they are not described in detail in the
document.
In this section, when you have configured the settings for a channel, click
Copy
to apply the
settings to other channels. Click
Refresh
to display the latest configuration. Click
Default
to
restore to factory default settings.
Configuring Alarm Event Settings
Alarm information settings include the setting of video detection, alarm input, abnormality and
alarm output.
5.1.1
Configuring Video Detect Settings
Video detection includes motion detection, video loss, and tampering. This function detects the
abnormal changes and triggers alarms.
5.1.1.1
Configuring Motion Detect Settings
When the moving object appears and moves fast enough to achieve the preset sensitivity value, the
system triggers an alarm and alarm linkage.
On the main web interface, select
ALARM
>
Video Detection
>
Motion Detect
.
Select the channel number and select
Enable
to enable the motion detect function for the
channel.
Set MD region.
1)
Click
Setting
behind
Region
.
The
Setting
interface is displayed.
