61
Duration of
lowering head
Setting is necessary when the rule type is
Distracted Driving
: The range is 1s–
60s.
Duration of
looking around
Duration of
calling
Setting is necessary when the rule type is
Calling
: The range is 1s–60s.
Duration of
driver not in
position
Setting is necessary when the rule type is
No Driver
: The range is 1s–60s.
Duration of
wearing
infrared-blocking
sunglasses
Setting is necessary when the rule type is
Wearing IR Blocking Sunglasses
:
The range is 1s–60s.
Duration of
smoking
Setting is necessary when the rule type is
Smoking
: The range is 1s–60s.
Duration of
acceleration
when camera is
shielded
Setting is necessary when the rule type is
Lens Tampering
: The range is 1s–
60s.
Click
OK
.
5.2.1.2
ADAS
Advanced Driver Assistance Systems (ADAS) alarms mainly include Forward Collision Warning, Lane
Departure Warning and Headway Monitoring Warning.
Preparation
Access to cornering lamp signal in advance: Alarm Input_2 (turn left), Alarm Input_3 (turn right).
After the cornering lamp of the vehicle is turned on, no Lane Departure alarm will be triggered.
Config: Driver assistance relies on the camera installation location, and cannot be used until the
calibration is completed. Try to install the camera in the middle of the windshield. When
configuring parameters, measure the width of the vehicle, the height of the camera, and the
distance from the camera to the vehicle head in advance. After the vehicle travels for a certain
period of time, the device will automatically calibrate the position.
The X value represents the installation yaw angle of the camera, and the range is 2958-5233; The
Y value represents the installation pitch angle of the camera, and the range is 3872-4320. If the
parameters exceed the above range, the system will judge that the camera installation angle is
unreasonable and the calibration fails.
Procedure
On the main web interface, click
AI > Parameters > ADAS
.
The
ADAS
interface is displayed. See Figure 5-8.
