84
Table 5-14
Overlay parameters
Parameter Description
Channel
title
Select
Channel Title
, and the
Setting
button is displayed. Then click
Setting
on the
right of the
Channel Title
, enter the channel title, and drag it to a proper location.
Time title
Select the
Time Title
check box, the
Setting
button is displayed. Then click
Setting
on the right of the
Time Title
, and then drag it to a proper location.
Plate No.
Tick
Plate No.
,
Setting
button shows up at the right side of
Plate No.
, click that and
drag plate title to proper position.
GPS
display
Select the
GPS Display
check box, the
Setting
button is displayed. Then click
Setting
on the right of the
GPS Display
, and then drag it to a proper location.
Click
OK
.
5.5.2.4
Storage Path
You can configure the storage path of captured snapshots and video recordings.
Select SETTING > CAMERA > ENCODE > Storage Path.
The
Storage Path
interface is displayed.
Storage Path
Click
Browse
to select the save path for snapshots and recordings.
Images and recordings by using functions of snapshots
and recordings
on the
Live
interface are saved in these two paths by default: C:\PictureDownload and
C:\RecordDownload.
Click
OK
.
5.5.3
Configuring PTZ Settings
You can configure the corresponding PTZ of the device channel.
Select SETTING > CAMERA > PTZ.
The
PTZ
interface is displayed. See Figure 5-39.
