3
2
Dimensions and Installation
Describes the installation of hardware. Prior to installation, you need to know about the front panel,
rear panel, structural sizes, and interface definition of the Recorder. Then you can install
corresponding HDD, SIM card, SD card, antenna, and Recorders.
Out-of-box Check
When you receive the Recorder, unpack the box for checks.
Firstly, check if there is any damage on the Recorder appearance (although the packing materials are
specially selected for protecting the Recorder from most of accidental hit during transportation).
Secondly, open the accessory box to check if the accessories are complete against the packing list.
Instructions about front panel, rear panel, and labels:
The functions of indicator lights and ports are described in the later chapter of the Manual.
The labels on the Recorder are very important for our after-sales service. To ensure the
after-sales service, keep the labels well, and do not tear or throw away. You need to provide the
serial number of the product when calling the after-sales service.
Recorder Structure
2.2.1
Front Panel
Describes the functions of the indicators and interfaces of the front panel.
Front Panel
Table 2-1
Descriptions of interfaces and indicators
No.
Name
Descriptions of interfaces and indicators
1
RJ-45 network port
One network port.
USB interface
Two USB ports that connect to peripheral devices such as USB
storage device and mouse.
