117
Select
Every Day
, set the device restart time, and the device will restart automatically
at that time point.
Select
Monday
to
Sunday
, set the device restart time, and the device will restart
automatically at that time point every week. If
Sunday
and
01:00
are selected, the
device will restart automatically at 1:00 every Sunday.
Click
OK
.
7.3.2
Configuring Auto Start
After configuring auto start, the device starts automatically at the scheduled time point. If you turn
the vehicle key to ACC before the configured auto start time, the device starts immediately. When
the ACC is powered off, the device will shut down as per the scheduled auto delay for shutdown.
Select SETTING > SYSTEM > Manager.
The
Manager
interface is displayed.
Select auto start.
Select
Never
, and the device will never start automatically.
Select
Every Day
and set the time. When you turn the vehicle key to ACC before this
time point, the device starts immediately.
Click
OK
.
7.3.3
Configuring Auto Shutdown
After configuring auto shutdown, the device automatically shuts down as per the ACC power off
time and auto start setting.
If you have set the time for auto start, there are two situations when the ACC is powered off: If
the system time is between the auto start time and auto shutdown time, the device is turned off
at the configured time point. If the system time is before the auto start time or after the auto
shutdown time, the device is turned off immediately.
If the auto start time is not set, when the ACC is disconnected, the device shuts down at the
scheduled time point.
Select SETTING > SYSTEM > Manager.
The
Manager
interface is displayed.
Select auto shutdown.
Select
Never
, and the device will never shut down automatically.
Select
Every Day
and set the time. The system will shut down as per the ACC power off
time and auto start setting. Select
Every Day
for
Auto Shutdown System
, and then
enter the specific time.
Click
OK
.
7.3.4
Delay for Auto Shutdown
After configuring delay for auto shutdown, when ACC is disconnected, the device shuts down as per
the settings of delay for auto shutdown.
If you enter a delay value that is not 0, the device automatically shuts down after the preset
delay.
