27
Language
Select a language for the Recorder system.
Video Standard Displays the video encode standard.
Logout Time
Configure time from 0 min to 60 min.
Plate No.
Enter the license plate number of vehicle where the Recorder is located.
CAM Time Sync
You can click the
CAM Time Sync
check box and enter the interval for camera
sync with the Recorder.
Click
OK
.
3.5.2
Date and Time Settings
You can configure settings such as date format, time format, and timing mode.
Select SETTING > SYSTEM > General > Date & Time.
The
Date & Time
interface is displayed. See Figure 3-7.
Date and time settings
Configure Serial port parameters. See Table 3-3.
Table 3-3
Date and time settings parameters description
Parameter
Description
Date format
Select a date format.
Time format
Select a time format.
Time zone
In the
Timing Mode
list, if
GPS
or
NTP
is selected, configure this parameter.
Configure the Time zone that the Recorder is at.
System Time Displays the current system date and time.
Sync PC
Click
Sync PC
to sync the system time with the PC from where you login the web
interface.
DST
The DST is applied in some countries or regions. Select the
DST
check box if it is
applied where the Recorder is located
1.
Click the
DST
check box.
DST Type
Start Time
