33
Alarm
Channel
The channel number of the remotely connected Recorder. You can only select a
channel that has not added remote Recorders.
Decode
buffer
Enter the size of decode buffer. The unit is millisecond and you can select from 80
through 480.
Service type
This must be set up when you select
Onvif
or
Custom
as the
Manufacturer
When selecting different manufacturers, the service types are different. Select the
service type based on your needs.
3.
Click
OK
.
The Recorder displays in the added Recorder area.
If the remote Recorder that you want to add has the same IP address and
TCP port with the existing added Recorder, then this Recorder cannot be
added.
indicates connection is successful;
indicates connection failed.
To delete an added Recorder, select it, and then click
Delete
; to modify the
information of an added Recorder, click
or double-click the Recorder.
3.6.3
Modifying IP Address of Remote Recorder
You can modify the IP address of remote Recorder according to your network plan.
Select SETTING > CAMERA > CAMERA LIST.
The
Camera List
interface is displayed.
In the
Added Recorder
list, click
corresponding to a Recorder.
The
Edit
interface is displayed. See Figure 3-15.
