VII
Please do not dismantle and destroy the battery without permission; water is not allowed to
enter the device; man-made damages are not covered by warranty.
Please do not throw the battery into fire or expose it to high-temperature environment.
Please do not dismantle, modify or deform the battery.
Avoid short circuit between positive and negative contacts (please do not place the battery
together with the objects such as necklace and hairpin etc. when carrying or storing the
battery).
Please replace new battery timely when it is damaged. Please contact local relevant
agency to deal with damaged battery properly, in order to prevent accidents.
Please charge the battery or discharge it to 50%
~
60% remaining capacity if it won't be
used for a long time, and place it in a dry and cool environment.
If the battery leaks and the liquid enters eyes accidentally, please do not rub your eyes;
wash your eyes with clean water and see a doctor immediately.
It is normal that the battery heats up after it is running for a period of time, because the
discharge power is quite big.
It is normal that the battery heats up when it is being charged.
The cycle times of power battery is 300 in normal application situation.
During charging of power battery, charging is completed when the charger displays “FULL”
and beeps continuously. Don’t take down batteries before charging is completed.
Application Environment Requirements
Please do not aim the PTZ at strong light (such as lighting, sunlight and so on).
Please transport, use and store the device within the allowed humidity and temperature
range.
Please do not let any liquid flow into the device.
Please do not block the device ventilation.
Please do not press, vibrate or soak the device.
Please pack the device with original package or material with equivalent quality.
Operation and Maintenance Requirements
Please do not dismantle the device privately.
Please do not touch sensor CCD or CMOS directly; use hair drier to remove dust or dirt
from the lens surface.
Please use soft dry cloth or clean soft cloth to dip a little mild detergent to clean the device.
Please do not touch or wipe the lens surface directly.
Please use the accessories provided by manufacturer and it shall be installed and repaired
by professional staffs.
Please avoid laser beam radiation to the surface when using laser beam device.
Please do not provide two or more power supply modes to the device at the same time;
otherwise, it may damage the device.
Max 1 aircraft is allowed to fly in the same area at the same time.
Summary of Contents for NAVIGATOR X1100
