56
Figure 0-13
Set waypoint parameters. Please refer to Table 0-1 for more details.
Step 4
Parameter
Note
Altitude
Set flight altitude of waypoint.
Speed
Set flight speed of waypoint
Head orientation
Set head orientation of waypoint according to requirement during flight.
Residence time
Set hovering time after the aircraft reaches a waypoint.
Latitude
and
longitude
Automatically acquire latitude and longitude of the waypoint when
adding the waypoint.
Manually set waypoint latitude and longitude. Waypoint position will
skip to manual setting point after setting is done.
Waypoint action
No action: it is not to set waypoint action.
Shutter: it will take photos after the aircraft arrives at the waypoint.
Action cycle
Action cycle setting is invalid when the waypoint action selects “No
Action”.
When waypoint action selects “Shutter”, input time. The aircraft
arrives at the waypoint and it will take a photo after a period of time.
Note
Action cycle shall be less than or equal to residence time.
Table 0-1
Click “Save” to make configuration valid.
Step 5
Click
to set waypoint parameters in batches. Meanwhile, it can modify or delete
several waypoints.
Click
to input mission name, click “Save” and you can check saved flight missions
Step 6
