65
prompt, along with buzzing. Meanwhile, the aircraft returns automatically.
1.18.2.1.3 Other Settings
Select “Settings > Flight Control Settings > Fence Settings”.
Set radius and altitude.
Set trigger distance.
For example, when the fence type is set as altitude, the radius is set as A meters and
altitude is set as B meters, and if the trigger distance is set as C meters, then it will trigger RTH
or landing when the aircraft is (A-C) meters away from the HOME point horizontally or flight
altitude exceeds (B-C) meters; the aircraft will implement the action of RTH or landing.
1.18.2.2 Enable Electronic Fence
Enable electronic fence after setting fence area.
Select “Settings > Flight Control Settings”, enable electronic fence on the right of the “Fence
Enable”.
Figure 0-25
1.18.3 Preview Settings
Set resolution, frame rate and max. bandwidth of preview image according to requirements.
Select “Settings > Flight Control Settings > Preview Settings” and enter the preview
Step 1
setting interface, as shown in Figure 0-26.
Figure 0-26
Select “Settings > Flight Control Settings > Preview Settings > Image Transmission
Step 2
Settings”.
