Dahua nvr4208-8p User Manual Download | Manualshive

Page: 16 / 411

background image

1

1 Features and Specifications

1.1 Overview

This series NVR is a high performance network video recorder. This series product support local preview,

multiple-window display, recorded file local storage, remote control and mouse shortcut menu operation,

and remote management and control function.

This series product supports centre storage, front-end storage and client-end storage. The monitor zone

in the front-end can be set in anywhere. Working with other front-end devices such as IPC, NVS, this

series product can establish a strong surveillance network via the CMS. In the network system, there is

only one network cable from the monitor centre to the monitor zone in the whole network. There is no

audio/video cable from the monitor centre to the monitor zone. The whole project is featuring of simple

connection, low-cost, low maintenance work.

This series NVR can be widely used in many areas such as public security, water conservancy,

transportation and education.

1.2 Features

Real-time
Surveillance



VGA, HDMI port. Connect to monitor to realize real-time surveillance.
Some series support TV/VGA/HDMI output at the same time.



Short-cut menu when preview.



Support popular PTZ decoder control protocols. Support preset, tour
and pattern.

Playback



Support each channel real-time record independently, and at the same
time it can support search, forward play, network monitor, record search,
download and etc.



Support various playback modes: slow play, fast play, backward play
and frame by frame play.



Support time title overlay so that you can view event accurate occurred
time



Support specified zone enlargement.

User
Management



Each group has different management powers that can be edited freely.
Every user belongs to an exclusive group.

Storage



Via corresponding setup (such as alarm setup and schedule setup), you

can backup related audio/video data in the network video recorder.



Support Web record and record local video and storage the file in the

client end.

Alarm



Respond  to  external  alarm  simultaneously  (within  200MS),  based  on
user’s  pre-defined  relay  setup,  system  can  process  the  alarm  input
correctly  and  prompt  user  by  screen  and  voice  (support  pre-recorded

audio).



Support central alarm server setup, so that alarm information can

remotely notify user automatically. Alarm input can be derived from

various connected peripheral devices.



Alert you via email/sms.

«
...
14
15
16
17
18
...
»

Summary of Contents for nvr4208-8p




























































































































































































































































































































































































































Reviews:

No comments

Related manuals for nvr4208-8p

Brand: Panasonic Pages: 76

Brand: Panasonic Pages: 43

Brand: NST Pages: 82

Brand: Ascendent Pages: 41

Brand: Idis Pages: 92

Brand: D-Teg Pages: 56

Kaptivator KTV1

Brand: Korg Pages: 59

Brand: AVYCON Pages: 2

Brand: AVYCON Pages: 2

Brand: DirecTV Pages: 2

Brand: Quer Pages: 16

Brand: Strong Pages: 31

Brand: Appro Pages: 47

Brand: Appro Pages: 87

DS-7200-ST Series

Brand: HIKVISION Pages: 119

Brand: AJA Pages: 137

DS-7208HWI-SV series

Brand: HIKVISION Pages: 241

Brand: Northern Pages: 167

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands