Local Basic Operations 36
If the password reset function is enabled, you can use mobile phone to scan the QR code to
reset the password. For details, see "4.1.3.2 Resetting Password on Local Interface."
If the password reset function is disabled, there are two situations:
If you configured security questions, you can reset the password by the security
questions.
If you did not configure the security questions, you can only use the reset button on the
mainboard to restore the Device to factory default.
Reset button is for some series product only.
4.1.3.1 Enabling Password Reset Function
After enabling password reset function, you can scan QR code on the local menu to reset
password.
Step 1 Select
Main Menu > Account > Reset Password
.
The
Reset Password
interface is displayed. See Figure 4-5.
Figure 4-5
Step 2 Check the box to enable reset function.
This function is enabled by default.
Step 3 Click
Apply
to set settings.
If the password reset function is disabled, you can follow the ways listed below to reset
password.
