Local Basic Operations 68
You need to have storage authorities to implement the Manual record operation. Make
sure the HDD has been properly installed.
Step 1 Right click mouse and then select
Manual > Record
or select
Main Menu >
STORAGE > RECORD
. See Figure 4-42.
For some series products, after you logged in, you can click the Rec button at the
front panel to go to the
Record
interface.
Figure 4-42
Step 2 Configure parameters.
Parameter
Description
Channel
Displays all the analog channels and the connected digital channels.
You can select a single channel or select
All
.
Record status
Auto
: Automatically record according to the record type and
recording time as configured in the recording schedule.
Manual
: Keep general recording for 24 hours for the selected
channel.
Off
: Do not record.
Snapshot status
Enable or disable the scheduled snapshot for the corresponding
channels.
Step 3 Click
Apply
.
