Local Basic Operations 141
Parameter
Description
Tour
Select the check box and select the channel for tour. When an alarm occurs, the
local interface of the NVR device displays the selected channel screen.
You need to set the time interval and mode for tour first, see 4.16.2 Tour.
After the tour is over, the preview interface is restored to the screen split
mode before the tour.
Log
Select the check box, the NVR device records the alarm information in the log
when an alarm occurs.
Voice
Prompts
Check the box and then select the corresponding audio file from the dropdown
list. System plays the audio file when the alarm occurs.
Refer to 4.17.1 File Manage to add audio file first.
Buzzer
Select the check box to activate the buzzer when an alarm occurs.
Step 4 Click
Apply
to complete the settings.
4.7.2.3 Face Recognition
You can compare the detected faces with the faces in the library to judge if the detected face
belongs to the library. The comparison result will be displayed on the AI mode live view screen
and smart search interface, and link the alarms.
System supports AI by Camera and AI by Device at the same time. The AI by device prevails if
you enable these two functions at the same time.
4.7.2.3.1
AI by Camera
You can use the connected camera to realize AI function. Make sure the connected camera
supports human face detection function.
Step 1 Select
Main Menu > AI > PARAMETERS > FACE RECOGNITION
.
The
FACE RECOGNITION
interface is displayed. See Figure 4-124.
