Local Basic Operations 218
Parameter
Description
Connect Type
In the
Connect Type
list, select the connection protocol type.
Click
, the IP Address interface is displayed.
In the
Source IP
box, enter the IP address (the machine that is
connected to the Device) that sends messages.
Convert
Select a character encoding mode.
Overlay
In the
Overlay
list, Select
Turn
or
ROLL
.
Turn: Once the information is at 16 lines, system displays the
next page.
ROLL: Once the information is at 16 lines, system rolls one
line after another to delete the first line.
When the local preview mode is in 4-split, the turn/ROLL function
is based on 8 lines.
Network time out
When the network is not working correctly and cannot be
recovered after the entered timeout limit, the POS information will
not display normally. After the network is recovered, the latest
POS information will be displayed.
Time Display
Enter the time that how long you want to keep the POS
information displaying. For example, enter 5, the POS information
disappear from the screen after 5 seconds.
Font Size
In the Font Size list, select
Small
,
Medium
, or
Big
as the text
size of POS information
COLOR
In the color bar, click to select the color for the text size of POS
information.
POS Info
Enable the POS Info function, the POS information displays in the
live view/WEB.
Line Delimiter
There is no line delimiter by default.
After set the line delimiter (HEX), the overlay information after the
delimiter is displayed in the new line. For example, the line
delimiter is F and the overlay information is
123156789
, NVR
displays overlay information on the local preview interface and
Web as:
123
6789
Step 3 Click
Apply
to complete the settings.
4.9.2.1 Privacy Setup
Step 1 Click
Setup
The
Privacy
interface is displayed. See Figure 4-189.
