Local Basic Operations 86
1) Select a channel and then click
File Upgrade
.
2) Select upgrade file on the pop-up interface.
3) Select the upgrade file and then click
OK
button.
After successful operation, system pops up upgrade successful dialogue box.
If there are too much remote devices, select
Device Type
from the drop-down list
to search the remote device you desire.
4.2.8 Remote Device Info
4.2.8.1 Device Status
You can view the connection and alarm status of the corresponding channel.
Select
Main Menu > CAMERA > REGISTRATION > Status
, the
Status
interface is displayed.
See Figure 4-60. Refer to Table 4-15 for detailed information.
Figure 4-60
Table 4-15
Icon
Description
Icon
Description
IPC works properly.
IPC does not support.
