User's Manual
376
Figure 4-263
Step 2
Select
Basic Services
and configure parameters.
There might be safety risk when
Mobile Push Notifications
,
CGI
,
ONVIF
,
SSH
and
NTP
Server
is enabled.
Table 4-85 Basic service parameters
Parameter
Description
Mobile Push Notifications
After enabling this function, the alarm triggered by the NVR can be
pushed to a mobile phone. This function is enabled by default.
CGI
If this function is enabled, the remote devices can be added through
the CGI protocol. This function is enabled by default.
ONVIF
If this function is enabled, the remote devices can be added through
the ONVIF protocol. This function is enabled by default.
NTP Server
After enabling this function, a NTP server can be used to
synchronize the device. This function is enabled by default.
SSH
After enabling this function, you can use SSH service. This function is
disabled by default.
Enable Device Discovery
After enabling this function, the NVR can be found by other devices
trough searching.
Private Protocol
Authentication Mode
●
Security Mode (Recommended): Uses Digest access
authentication when connecting to NVR.
●
Compatible Mode: Select this mode when the client does not
support Digest access authentication.
Step 3
Click
Apply
to complete the settings.
Summary of Contents for NVR52-16P-4KS2 Series
