Dahua NVR5208-EI User Manual Download

Page: 379 / 489

●

When connecting to a third-party IPC, make sure that the IPC supports ONVIF protocol and

DHCP is enabled.

Procedure

Step 1

Select Main Menu > NETWORK > Switch.

Figure 5-239 Switch

Step 2

Select Route or Bridgein Mode as needed.
The default mode is route.

Step 3

Configure IP address, subnet mask, and default gateway.
In the bridge mode, you cannot configure these parameters.

In the route mode, you can click

to enable Auto IP Allocation, and the function is

turned on by default.

Do not set the IP address to the same network segment with the Device. We recommend

you use the default setting.

Step 4

Click Apply.

Related Operations

When connecting IP camera to PoE port, if all the channels are occupied, the system prompts you

whether to take place of one channel.

Table 5-72 PoE operation

PoE operation

Description

Connect to PoE port

When an IPC is connected to the PoE port, the system automatically

assigns the IP address to the IPC according to the set IP segment. The

Device will try the method of arp ping to assign the IP address. If DHCP is

enabled on the Device, the Device will use DHCP to assign the IP address.

●

When IP address is successfully set, the system will broadcast through

the switch function. If there is a response from the IPC, it means the

connection is successful, and the Device will log in to the IPC. You can

find the corresponding channel occupied and there is a PoE icon at

the upper-left corner.

●

You can also view PoE status such as channel number and PoE port

number on the Added Device list in Main Menu > CAMERA >

Camera List.

Disconnect PoE port

When an IPC is disconnected form PoE port, you will find the information

of Failed to find network host on the live channel window.

User's Manual

363

Summary of Contents for NVR5208-EI










































































































































































































































































































































































































































































































Search results

Summary of Contents for NVR5208-EI

Reviews:

Related manuals for NVR5208-EI

Brands by name

Popular brands

Dahua NVR5208-EI, User Manual

Search results

Summary of Contents for NVR5208-EI

Reviews:

Related manuals for NVR5208-EI

Brands by name

Popular brands