Figure 4-28
Please refer to the following sheet for detailed information.
Parameter
Function
Max connection It is the max Web connection for the same device. The value
ranges from 1 to 120. The default setup is 120.
TCP port
The default value is 37777. You can input the actual port
number if necessary.
UDP port
The default value is 37778. You can input the actual port
number if necessary.
HTTP port
The default value is 80. You can input the actual port number if
necessary.
HTTPS port
The default value is 443. You can input the actual port number if
necessary.
RTSP port
The default value is 554.
4.8.2.3 PPPoE
From main window->Setup->Network->PPPoE, the PPPoE interface is shown as in Figure 4-29.
Input the PPPoE user name and password you get from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then reboot the device to get the setup activated.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from the
IP address column.
Please note, you need to use previous IP address in the LAN to login the device. Please go to the
IP address item to via the device current device information. You can access the client-end via
this new address.
156
Summary of Contents for NVR6000 Series
