Local Configurations
127
Parameter
Description
Snapshot
Select the
Snapshot
check box to take a snapshot of the selected
channel.
To use this function, make sure the following settings are
configured:
The snapshot function is enabled for motion detect alarms in
Main Menu > STORAGE > SCHEDULE > Snapshot
.
Select
Main Menu > CAMERA > Snapshot
, in the
Mode
list,
select
Event
.
Video Matrix
Select the check box to enable the function. When an alarm event
occurs, the video output port outputs the settings configured in
Main Menu > DISPLAY > TOUR
.
Not all models support this function.
Buzzer
Select the check box to activate a buzzer noise at the Device.
Log
Select the check box to enable the Device to record a local alarm
log.
Voice Prompts
Select to enable audio broadcast/voice prompts in response to a
motion detection event.
Click
Apply
to save the settings.
Click
Default
to restore the default setting.
Click
Copy
, in the
Copy
dialog box, select the additional channel(s) that you want
to copy the motion detection settings to, and then click
Apply
.
Click
Test
to test the settings.
Setting the Motion Detection Region
Next to
Region
, click
Setting
.
The region setting screen is displayed.
Point to the middle top of the interface.
The setting interface is displayed. See Figure 5-108.
Configure the regions settings. You can configure totally four regions.
Select one region, for example, click
.
Summary of Contents for Smart 1U
