Local Configurations
48
Configure the record settings parameters. See Table 5-9.
Parameter
Description
Channel
In the
Channel
list, select a channel to record the video.
Pre-record
In the
Pre-record
list, enter the amount of time that you want to start
the recording in advance.
Redundancy
If there are several HDDs installed to the Device, you can set one of
the HDDs as the redundant HDD to save the recorded files into
different HDDs. In case one of the HDDs is damaged, you can find the
backup in the other HDD.
Select
Main Menu > STORAGE > HDD MANAGER
, and then
set a HDD as redundant HDD.
Select
Main Menu > STORAGE > SCHEDUE > Record
, and
then select the
Redundancy
check box.
If the selected channel is not recording, the redundancy
function takes effect next time you record no matter you
select the check box or not.
If the selected channel is recording, the current recorded
files will be packed, and then start recording according to the
new schedule.
Not all models support this function.
The redundant HDD only back up the recorded videos but not
snapshots.
Event type
Select the check box of the event type which includes
General
,
MD
(motion detect, video loss, tempering, diagnosis),
Alarm
(IoT alarms,
local alarms, alarms from alarm box, IPC external alarms, IPC Offline
alarms),
MD&Alarm
,
Intel
(IVS events, face detection), and
POS
.
Summary of Contents for Smart 1U
