Local Configurations
131
To configure the settings for the tampering detection parameters, see “5.10.1.1
Configuring Motion Detect Settings.”
For PTZ activation, different from motion detection, the video loss detection can
activate PTZ preset, tour, and pattern.
Click
Apply
to complete the settings.
Click
Default
to restore the default setting.
Click
Copy
, in the
Copy
dialog box, select the additional channel(s) that you want
to copy the motion detection settings to, and then click
Apply
.
5.10.1.4
Configuring Diagnosis Settings
This function can be used only when it is supported by the camera.
When the video appear the conditions such as blurry, overexposed, or the color changes, the
system activates the alarm.
To configure the diagnosis settings, do the following:
Select
Main Menu > ALARM > VIDIEO DETECT > Diagnosis
.
The
Diagnosis
interface is displayed. See Figure 5-114.
Summary of Contents for Smart 1U
