Local Configurations
143
Configure the settings for the parameters of drawing rules. See Table 5-39.
Parameter
Description
Name
Enter the customized rule name.
Period
Configure the minimum time period for activating alarms by
detecting the abandoned objects.
Filtering Target
Click
to draw areas to filter the target.
You can configure two filtering targets (maximum size and
minimum size). When the target that is crossing the tripwire is
smaller than the minimum size or larger than the maximum size, no
alarms will be activated. The maximum size should be larger than
the minimum size.
Drag to draw an area.
Click
Save
to save the settings.
Click
to set the actions to be triggered. For details, see "5.10.2.1 Configuring
Select the
Enable
check box, and then click
Apply
.
The abandoned object detecting function is active. When the object is placed in the
defined detection area for more than the set time, the system activates alarms.
Summary of Contents for Smart 1U
