Local Configurations
170
Parameter
Description
More Setting
Show Message: Select the
Show Message
check box to enable a
pop-up message in your local host PC.
Buzzer: Select the check box to activate a buzzer noise at the
Device.
Video Matrix: Select the check box to enable the function. When
an alarm event occurs, the video output port outputs the settings
configured in "
Main Menu > DISPLAY > TOUR
."
Not all models support this function.
Send Email:
Enable the system to send an email notification when
an alarm event occurs.
To use this function, make sure the email function is enabled in
Main
Menu > NETWORK > EMAIL
.
Log: Select the check box to enable the Device to record a local
alarm log
Click
OK
to save the settings.
On the
Wireless Detector
interface, click
Apply
to complete the settings.
5.11.2
Configuring Temperature and Humidity Camera
You can view, search and export the temperature and humidity data of camera with such
sensors and configure the alarm event settings.
To use this function, please make sure there is at least one camera with temperature and
humidity sensor has been connected to the Device.
5.11.2.1
Enabling Detecting Function
You should enable the IoT function the first time when you enter this interface.
On the main menu, click
IoT >
MANAGER > Temperature/Humidity
.
The
Temperature/Humidity
interface is displayed. See Figure 5-151.
Summary of Contents for Smart 1U
