Local Configurations
59
Function
Description
Not all cameras support this function.
Color Setting
Open the
COLOR
interface where you can adjust the video image
color.
Image
Click to modify the camera properties.
5.2.5
Color Setting
You can adjust the video image color effect such as sharpness, brightness, and contrast. The
parameters are different according to the connected camera type. Take analog channel as an
example.
In the live view screen, right-click on the analog channel to see the shortcut menu, and then
select
Color Setting
, the
COLOR
interface is displayed. See Figure 5-35.
For details, see "5.5.1 Configuring Image Settings."
Parameter
Description
Period
Divide 24 hours into two periods and configure the corresponding
color settings.
Effective Time
Enable the function and then set the effective time for each period.
Sharpness
Adjust the sharpness of image edge. The bigger the value is, the
more obvious the image edge, and the noise is also greater.
The value ranges from 1 to 15. The default value is 1.
Summary of Contents for Smart 1U
