3
○
1
Draw out the HDD bracket
○
2
Make sure the HDD metal
surface is facing up and then put
the HDD into the bracket
horizontally
. After the HDD is in
the proper position, the columns
on the two sides can lock the
screw holes of the HDD to secure
it.
○
3
Put the HDD into the
device.
When you remove the HDD, please refer to the following figure to pull the spring up and then
remove the HDD.
Figure 1
The rear panel is shown as in Figure 2.
Figure 2
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
VIDEO IN
Video input
Connect to analog camera, video input
signal.
