51
The day & night interface
Figure 4-5
Configure day & night parameters. See Table 4-5.
Step 2
Table 4-5
Day & night mode description
Parameter Description
Type
Select
Type
from
Electrical
and
ICR
.
Mode
You can select Camera display mode from
Color
,
Auto
and
B/W
.
Day & night configuration is independent from profile management configuration.
Color
: The system displays color image.
Auto
: The system switches between color and black-and-white display according
to the actual condition.
B/W
: The system displays black-and-white image.
Sensitivity
Select
Auto
as the
Mode
. Then You can configure this parameter.
You can configure camera sensitivity in switching between color and
black-and-white mode.
4.1.1.1.6
Configuring Focus & Zoom
Click the
Focus & Zoom
tab.
Step 1
The
Focus & Zoom
interface is displayed. See Figure 4-6.
