WEB Operations
24
Click
Lock All
, you can lock all windows, and then you can not adjust positions and sizes
of the windows.
Click
Close All
, you can close all windows.
You can also unlock and lock a single window, and you can click “×” to close a single
window.
3.3.6 Block/Window Splitting
You can split blocks and windows according to your requirements.
Block Splitting
When splitting blocks, the original open windows of blocks will be automatically deleted, and
then new open windows will be opened according to the window number you selected. After
blocks are split, the original open windows will be closed but the original signals will be
reserved.
If the quantity of original open windows is less than the quantity of the blocks, the
superfluous windows will display “No Signal” after the block is split.
If the quantity of original open windows open windows is more than the quantity of the
blocks, windows exceed the quantity of the blocks will be closed.
Step 1 Click
Division > Block
.
The
Block
interface is displayed. See Figure 3-12.
Figure 3-12 Block
Step 2 Select fixed splitting
, or you enter the numbers (for
example, “3×3” means the block will be split into 9 blocks).
Step 3 Click
OK
.
The prompt box is displayed. See Figure 3-13.
Figure 3-13 Prompt box