WEB Operations
70
Figure 3-71 Connecting sending cards
The first four Ethernet ports of the sending card are a group, and the last four
Ethernet ports are a group. Receiving cards of each group (four Ethernet ports or
some of the ports) must form a rectangle.
The groups are spliced together to form a rectangle. Sending cards in group one
and sending cards in group two can not be spliced together to form a rectangle.
Table 3-14 Description
Parameter
Description
Width
Width and height of the receiving cards will be displayed.
Height
Background
image
Click the check box, select the picture that you want to set as the
background picture in the drop-down box. For methods of uploading
background pictures, see “3.4.1.7 Background Picture”.
Correction
coefficient
Select coefficient correction files in the drop-down box, click
Setting
to
correct display parameters related to LED screens. For methods of
uploading coefficient correction files, see “3.4.5.6Correction Coefficient”.
Reset all
Click
Reset All
, the connecting lines of the receiving cards will all
disappear. You need to reconnect the lines according to your
requirements.
Cancel port
Click
Cancel Port
, receiving cards connecting lines of the current
Ethernet port will all disappear. You need to reconnect the lines
according to your requirements.
Back
Click
Back
, connecting lines of the last receiving card will disappear, and
the connecting lines go back to the previous receiving card.
