WEB Operations
78
Click
Import
, you can import the Gamma table so that you can tweak values in
the Gamma table quickly.
Contact technical personnel for Gamma values.
Step 7 Drag the brightness bar to adjust brightness of the screen.
Step 8 Click
Send to Output Port
, you can send image parameters to the corresponding
receiving card of a single output port to make the settings effective.
Click
Send to All Walls
, you can send image parameters to all the receiving
cards.
Click
Send to Single Wall
, you can send image parameters to all receiving cards
of a single video wall.
3.4.5.5 Screen Control
You can control images on the screen. The operations you can do include turn on/off the screen,
freeze, and self testing.
Step 1 Select
Setting >
Display >
Screen Control
.
The
Screen Control
interface is displayed. See Figure 3-81.
Figure 3-81 Screen control
Step 2 Click
Acquire
.
The
Choose RecvCard
interface is displayed. See Figure 3-82.
Figure 3-82 Choose receiving cards
Step 3 Select Ethernet Port number, and then click
Save
.
The system will acquire detailed parameters of images on the LED screen.
