12
VTO No. management
Figure 2-9
Click
“Add”, set outdoor station parameters by reference to Table 2-2 and click “OK”.
Step 10
Repeat this step to add other outdoor stations in the group.
Table 2-2 VTO No. management description
Parameter
Description
VTO No.
VTO number.
Register Password
Signaling interactive use in SIP system. Adopt default
value.
Build No.
Number of the building where VTO is located.
Unit No.
Number of the unit where VTO is located.
IP Address
IP address of VTO.
Username/Password
Username and password to login WEB interface of this
VTO.
(Optional) S
elect “Household Setting > Room No. Management”.
Step 11
The system
displays “Room No. Management” interface, as shown in Figure 2-10.
When there are master VTH and extension, both shall be added.
Room No. management
Figure 2-10
Click
“Add”, set VTH parameters by reference to Table 2-3 and click “OK”. Repeat
these steps to add other VTH in the group.
Table 2-3 Room No. management description
Parameter
Description
Family Name
Set VTH username and nickname, in order to distinguish.
First Name
