Dahua -XVR5408L-X User Manual Download

Page: 158 / 359

Local Configurations

142

No.

Function

Description

List Display

This area includes

Mark List

and

File List

: Click the

Mark List

button, the marked recorded video



list is displayed. Double-click the file to start playing.

: Click the

File List

button,

the searched recorded video



list is displayed. You can lock the files. For details, see "5.9.8

Using the File List."

Full Screen

Click

to display in full screen. In the full screen mode, point to

the bottom of the screen, the time bar is displayed. Right-click on

the screen to exit full screen mode.

Time Bar Unit

You can select 24hr, 2hr, 1hr, or 30min as the unit of time bar. The

time bar display changes with the setting.

Table 5-33

5.9.3.1 Introducing Playback Controls Bar

You can perform the operations such as control the speed of playback, add mark, and take

snapshots through the playback controls bar. See Figure 5-104 and Table 5-34.

Figure 5-104

The play backward function and playback speed are dependent on the product version. The

actual product shall govern. You can also contact the technical support to consult the hardware

version information.

Icon

Function

Play/Pause.

During playing back, you can switch between play and pause.

Stop.

During playing back, you can click the

Stop

button to stop playback.

Summary of Contents for -XVR5408L-X








































































































































































































































































































































































Search results

Summary of Contents for -XVR5408L-X

Reviews:

Related manuals for -XVR5408L-X

Brands by name

Popular brands

Dahua -XVR5408L-X, User Manual

Search results

Summary of Contents for -XVR5408L-X

Reviews:

Related manuals for -XVR5408L-X

Brands by name

Popular brands