DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Analog Ultrasonic Cleaners " WUC-A "
17/36
professional.
CLEANING
1. Before cleaning the unit, disconnect the power cord from the wall socket. Otherwise, it may
cause an electric shock or fire.
2. To clean the unit, a neutral detergent and soft cloth is recommended. Do not use coarse
cloth, strong chemicals or organic solutions.
3. Do not use water, Benzene, Thinner or any alcohol for cleaning the product. It may cause
discoloration, damage, an electric shock or fire.
4. If you expect damage by a chemical during cleaning, call technical support team.
4. Products Management
4.3 If product Defect Occur
Situation
Confirmations and Solutions
No Power
-
Check the connection of power.
-
Check the Fuse-holder.
Increasing temperature in Bath
During the operation, temperature should be up to max.
70-80 with no damages of equipment.
℃
Off Heat-on indicator during
Heat-on mode
Normal state (The time for sensor adjustment of the
temperature to keep)
No Ultrasonic operation during
Heat-on indicate
Caused the damages from Ultrasonic circuit and request
A/S repair service.
※
If you have any problem other than the above, please call technical service of manufacturer
or an official agent.
