S
ETTING
I
NTERNAL
F
UNCTIONS
W
ELDING
C
ONDITION
C
HAPTER
6
85
Chapter 6
W
elding Condition
6.7 Setting Internal Functions
This section explains how to set the internal functions with the details.
The internal functions can be customized according to the using environment of the customer for further convenient use
of the welding power source.
6.7.1
Setting procedure
This section explains how to set the internal functions.
Details of internal function (
Detailed information on internal functions)
T I P S
• The internal function is activated at the point when the setting value is changed. To change the set
values of internal functions, ensure that there is no mistake in the function No. as well as in the
function setting.
1.
Display "FUNCTIONS" in the MENU screen.
2.
Turn the screen operation knob, to display the function No. to set.
3.
Press the screen operation knob.
⇒
The display on the right digital meter changes to a flashing mode.
●
Turn the screen operation knob and point the cursor to
FUNCTIONS.
●
Press the screen operation knob.
⇒
The contents of the previously displayed function No. will
be displayed on the LCD panel.
⇒
The function No. is displayed on the left digital meter in a
flashing mode.
⇒
The setting value of each function No. is displayed on the
right digital meter.
