SFLC-212-173
6
1. Product outline
1.1 Usage of product
This single unit can measure and monitor voltage ×3, current ×3, demand-current ×3, active-power, demand
active power, reactive-power, power-factor, frequency, watt-hour, var-hour.
The measurement monitor of an initial power receiving circuit, an energy conservation power monitor, a demand
current measurement monitor, etc. are adapted for various usages from a low tension circuit to a high tension
circuit. The intensive monitor doubled with the system by option (analog output, alarm output, pulse output,
external operation input) addendum is possible.
1.2 Features of product
High-performance products which collected the function of the power line multi-meter (QLC-110L, DLC-110L)
of our company.
This product is 3-phase 3-wire, single-phase 2-wire, single-phase 3-wire common type.
Product inventory can be standardized.
Bar graph 1 measurement and digital 4 measurement are displayed simultaneously.
Analog output 3 circuit and a pulse output and a contact-output can be taken out. (Option)
And, An output factor can be selected by setting.
External operation inputs are possible of reset. (Option) Choice of an alarm output, the maximum/minimum value,
and an alarm output, and the maximum/minimum value is possible at setting.
Power supply is AC85 to 264V，DC80 to 143V (for both AC and DC uses).
The mounting method of this unit is compatible with the mounting method of conventional 110 square
mechanical meter. This unit is mounted at 2 diagonal points.
Integrated value of Wh and varh can indicate expansion to 3rd digit below the decimal point.
A tidal current measurement (output 2 quadrant) change is possible for var and cosφ.
With backlight (white LED backlight) function.
In addition, the selection of the on / off / auto off and, you can set the brightness.
LCD can be chosen from 2 kinds, the type to see from the top and the type to see from the bottom.
(Please designate it at an order.)
1.3 Composition of type
TYPE Specification code
SFLC-110L- □□□□□-□□□
Installation position
１：For an upper installation.
２：For an lower installation.
Option
Specification
code
External operation
input
Analog output or
communication output
Contact output
０－００
Nothing
Nothing
Nothing
１－１１
One circuit
DC4 to 20mA×3 circuits Pulse ＋ Alarm
１－Ｍ１
One circuit
Modbus RTU (RS-485)
Pulse ＋ Alarm
１－Ａ１
One circuit
Protocol A (RS-485)
Pulse ＋ Alarm
Auxiliary power supply
１：AC85 to 264V, DC80 to 143V for both AC and DC uses
Input range
Ｆ：Common use for AC150V, AC300V. AC5A
Input circuit
Ｆ：Common use for 1φ2W, 1φ3W, 3φ3W.
Hardware model
Ｄ：R-S-T，White backlight
Ｅ：R-Y-B，White backlight
Ｆ：U-V-W，White backlight
