Daiichi Electronics SMLC-110L, Instruction Manual

SMLC-213-154 

18

4.3.6 Reset 

Various kinds of reset are performed.  The kind of reset is as follows and operations are different, respectively.  
Reset of maximum value and minimum value (it updates to the instantaneous value at the time)， 
Alarm output reset (OFF of an alarm output (at the case of manual reset setting)). 
And, the operation from each measurement display constitutes conditions at each reset.  

(1) Reset of maximum value and minimum value 

Reset of the various measurement values of maximum value and minimum value is performed.  
This reset has two types of methods. (How to perform according to a measurement factor individual.   
How to reset all maximum values and minimum values by package.) 
 
<Caution> After a startup, needed is reset of maximum value and minimum value.  
 
a) Individual reset  

Reset of only a certain differential maximum value or the minimum value is performed.   
Other maximum values and minimum values are not reset by this operation.  
① A measurement factor to reset is displayed. (Maximum value, minimum value display) 
② Press  RESET/SHIFT  for longer than 1 seconds. 
 

<Caution> An alarm output will be reset if this operation is performed by instant measurement display.  

Please be sure to perform this operation after displaying the maximum value and a minimum value  
measurement factor to make it reset.  

 
 
               Maximum, Minimum measurement display.                           Reset completion. 
 

b) Package reset  

Reset of all the maximum values and minimum value is performed.  
In addition, setting can perform same operation in external operation input.  
Please refer to "5.3.2 Setting mode 2 (3) external operation input setting" for the setting method, 
Please refer to "6.3 Option" for the external operation input, 

 
① Press  RESET/SHIFT  and   ＋  together for longer than 1 seconds.   

By the maximum and the minimum measurement display and ground fault phase detection display. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
               Maximum, Minimum measurement display.                          Reset completion. 

 RESET/SHIFT  

1 second 

Instantaneous display  

The range of minimum to maximum 
is displayed in bar graph.  

Minimum display 

Instantaneous 
display

 Maximum display 

Minimum display 
(Reset) 

Maximum display 
(Reset) 

 RESET/SHIFT  

and ＋ 1 second 

Instantaneous display   

The range of minimum to maximum 
is displayed in bar graph.  

Minimum display 

Instantaneous 
display 

 Maximum display 

Minimum display 
(Reset) 

Maximum display 
(Reset)