SVD-208-053
3
1. Product outline
This product is the setting instrument for instrumentation of the plug-in type that detects excess and deficiency
to AC-voltage input, and outputs a contact signal.
1.1 Features of product
① This product is the high quality and high reliability and noise-proof design.
② Detection action can be checked in a light emitting diode.
③ The dead-band range can do variable.
④ It can be established clearly by the digital switch.
⑤ This product is compact plug-in type.
1.2 Composition of type
S V D - ( 1 ) - 1 0 5 ( 2 )
(1) (2)
Mark
Contents
Mark
Contents
H
High limit setting
－
With no contact delay circuit
L
Low limit setting
D
With contact delay circuit
HL High and low limit setting
HH 2 steps of high limit setting
LL 2 steps of low limit setting
2. Specification and performance
2.1 Specification
Item
Specification
Input
(Input current)
① 0～300V (1mA) 50/60Hz
② 0～220V (1mA) 50/60Hz
③ 0～173.2V [300/√
3
V] (1mA) 50/60Hz
④ 0～150V (1mA) 50/60Hz
⑤ 0～127V [220/√
3
V] (1mA) 50/60Hz
⑥ 0～110V (1mA) 50/60Hz
⑦ 0～86.6V [150/√
3
V] (1mA) 50/60Hz
⑧ 0～63.5V [110/√
3
V] (1mA) 50/60Hz
Auxiliary supply
① AC･DC80～264V (AC100/110V 50/60Hz, AC200/220V 50/60Hz, DC100/110V)
AC power：5.7VA, DC power：2.2W
② DC38～58V (DC48V) 2.2W
③ DC19～29V (DC24V) 2.2W
Output
Contact output Each 1c
Contact
capacity
Maximum switching load：AC250V 2A (cosφ=1)，DC110V 100mA (L/R＝7ms)
Minimum switching load：DC5V 10mA
Use relay
G6C-2114PUS (OMRON Corporation)
Mechanical life：50 million times (Switching frequency, 300 times/minute)
Electric life：100,000 times (Switching frequency, 30 times/minute)
Setting range
H
H ：10～99％ (1％ step) ，L ：－
L
H ：－ ，L ：10～99％ (1％ step)
HL H ：10～99％ (1％ step) ，L ：10～99％ (1％ step)
HH H1：10～99％ (1％ step) ，H2：10～99％ (1％ step)
LL L1：10～99％ (1％ step) ，L2：10～99％ (1％ step)
Dead band
0.5～5％ continuation variable
Starting delay time(
３
) 0.5 second (Standard)
(Production is possible in 0.5～10s in 0.5s step.)
Contact delay (
３
) Option
(Production is possible in 0.5～10s in 0.5s step.)
Operation temperature
and humidity
-10～+55℃ ，30～85％ RH
Storage temperature
-30～+60℃
Case color
Black (Munsell N1.5)
Note(
３
) Starting delay and contact delay (option) cannot be designated simultaneously.
［In case of starting delay designation.］(TYPE：SVD-□-105)
［In case of contact delay designation.］
（TYPE：SVD-□-105D）
Contact delay is set to below 0.3 seconds of input-and-output response of product. Starting delay becomes
almost the same as the time of contact delay.
