SFLC-211-185
21
4.3.6 Reset
Various kinds of reset are performed. The kind of reset is as follows and operations are different,
respectively. Reset of integral power consumption (zero clear)， Reset of maximum value and minimum value
(it updates to the instantaneous value at the time)， Alarm-output reset (OFF of an alarm output (at the
case of manual reset setting)).
And, the operation from each measurement display constitutes conditions at each reset.
(1) Integral power consumption reset
It resets by package about the integrated value of various watt-hour. Watt-hour reset is performed in
the setting mode 2. In detail explanation in the setting mode 2, please refer to "5.3.2 Setting mode 2".
① Press SET and RESET/SHIFT together for longer than 3 seconds. It goes into the setting mode 2.
② MODE is pushed until setting is set to No.261. Further RESET/SHIFT is pushed once and it is made a
watt-hour-reset display by No.262.
③ Press SET for longer than 3 seconds.
④ DISPLAY is pushed and it returns to a measurement display.
No.262（Clear completion） No.262（Before clear）
Setting mode 2
×ｎ
(To setting No.262)
SET ＋ RESET/SHIFT
3 seconds
A(Y) display
V(RY) display Wh display
W display
Measurement display
Setting factor Now setting
Setting No.
No.211
New setting
RESET/SHIFT
MODE
Wh and varh,
alternately-
lights
Setting No.
SET 3 seconds
Wh and varh,
alternately-l
ights
Setting No.
It displays by
clear completion.
DISPLAY
It becomes the "CLEAr"
display after "0" displays.
