SFLC-211-185
35
(13) Backlight setting
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Setting and operation procedures
Page
Sets the action of
backlight.
(151)
Press SET for longer than 3 seconds
Press MODE
Press MODE
Press MODE
(111) (121AL) (131H)
Press MODE
Select a backlight action by + and -
Press SET
(141H) (151)
Selected backlight action is entered
Press DISPLAY
Returns to display mode.
42
Sets the brightness
of backlight.
(152)
Press SET for longer than 3 seconds
Press MODE
Press MODE
Press MODE
(111) (121AL) (131H)
Press MODE
Press RESET/SHIFT
Select a brightness by + and -
(141H) (151) (152)
Press SET
Selected backlight brightness is entered
Press DISPLAY
Returns to display mode.
42
(14) Other, measurement setting
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Setting and operation procedures
Page
Sets the tidal
current
measurement of
reactive power and
power-factor.
(321)
Press SET and DISPLAY together for longer than 3 seconds
Press MODE
(311) (321)
Press RESET/SHIFT
Select a tidal current measurement ON/OFF by + and -
(322)
Press SET
Selected action is entered
Press DISPLAY
Returns to display mode.
53
5.3 Setting in detail explanation
5.3.1 Setting mode 1
Display mode
SET
3 seconds
111~116
Display setting
MODE
121AL~123AL
Alarm output setting
MODE
131H~135
Demand detection setting
MODE
141H~142L
Instant measurement detection setting
MODE
151~152
Backlight setting
MODE
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
Setting mode 1 is selected by pressing SET switch for longer than 3 seconds.
Pushing MODE switch performs movement of setting item.
The present mode can be returned to the display mode by pressing DISPLAY switch.
Setting mode 1