background image

Troubleshooting

Symptom

Remedy

No LED illuminated

Check for 5 VDC at sensor, LED is 
dark when 5 VDC is not present

Unit turns on and off too frequently

Sensor must be located as de

-

scribed in "Mounting Location" on 

page 3

.

For Sensors 669529101 and 669529201 Only

System fan does not come on 

properly

Verify wiring is correct. See "Fan 
Test" on 

page 4

.

Fan runs continuously

Check fan On/Off switch, ON posi

-

tion runs indoor fan continuously.

Daikin Training and Development

Now  that  you  have  made  an  investment  in  modern,  efficient  Daikin  equipment,  its  care  should 

be  a  high  priority.  For  training  information  on  all  Daikin  HVAC  products,  please  visit  us  at 

 

www.DaikinAP.com and click on Training, or call 540-248-9646 and ask for the Training Department.

Warranty

All  Daikin  equipment  is  sold  pursuant  to  its  standard  terms  and  conditions  of  sale,  including 

 

Limited Product Warranty. Consult your local Daikin Representative for warranty details. Refer to Form 

933-430285Y. To find your local Daikin Representative, go to www.DaikinAP.com .

Aftermarket Services

To  find  your  local  parts  office,  visit  www.DaikinAP.com  or  call  800-37PARTS  (800-377-2787). 

 

To find your local service office, visit www.DaikinAP.com or call 800-432-1342.

This document contains the most current product information as of this printing. For the most up-to-date 

product information, please go to www.DaikinAP.com .

Products manufactured in an ISO certified facility.

©2013 Daikin Applied   •   www.DaikinAP.com   •   800.432.1342      

IM 955-3 / Page 6 of 6 

Summary of Contents for 669529101







Reviews: