AHT Cooling Systems GmbH | en
Operation | 10
417632_2_0820
49 / 84
Opening/closing the doors.
Hands (body parts) may become trapped on
the hinge or handle side.
§
Look out for other persons when opening/
closing the lid.
§
When opening/closing, do not reach into
the opening gap, especially on the hinge
side.
Low temperature.
Frostbite to skin.
§
Wear protective gloves when loading.
NOTICE
Material damage due to misuse.
Destruction of the coating, leading to reduced visibility
of the contents.
§
Insert the mesh basket before closing the door.
§
Do not remove mist/ice off the glass surfaces us-
ing mechanical means, such as an ice scraper.
§
Do not hold the door open using your body when
loading.
Property damage due to misuse.
§
Only add goods to the appliance once the spe-
cified temperature for the product has been
reached.
§
Carefully add goods.
§
Adhere to loading specifications.
§
Close door immediately and completely after load-
ing.
a) Remove any water that may have collected on sur-
faces (seals and frame) before closing the door.
b) Check the temperature on the interior thermo-
meter
[see
.
Loading specification
– See the “Loading specification” sticker inside the
appliance (top right).
a) Open the door at an opening angle of 90°.
b) To load, only ever open one door. Never open
more than one door at the same time.
c) When loading, never keep the door open for
longer than 10 minutes.
It is recommended that you load the appliance out-
side of business hours to prevent restricted visibil-
ity of the contents due to the build-up of mist.
d) Do not add goods beyond the end of the display
shelf.
1
Fig. 12:
End of display shelf (1)
e) Load display shelves up to a maximum of 10 mm
below the front edge of the display shelf above.
CAUTION
Handling the mesh baskets.
Hands and fingers may become trapped.
§
Only handle the mesh baskets from the
front.
§
Do NOT grab the mesh baskets from the
sides when moving them in or out.
f) Only the mesh basket out as far as the stop.
1
Fig. 13:
Pull out the mesh basket (1)
10.2
Shutdown and restart
WARNING
Work on the electrical system.
Contact with live parts may result in electric
shock.
§
Only qualified staff may carry out work on
the electrical system.
§
Observe the electrical safety rules prior to
commencing work.
1. Disconnect the appliance.
2. Secure the appliance against reconnec-
tion.
10.2.1 Shutdown
Reasons for shutdown by qualified staff
– Maintenance, service, repair
– Main cleaning
[see
– Disposal
[see
Reasons for shutdown by operating personnel
– Damage to appliance
– e.g. broken door
For
qualified staff
, the implementation is described in
detail in the corresponding service instructions.
Only
trained operating personnel
or
qualified staff
may shut down the appliance.
WARNING
Shutdown of the appliance.
Contact with live parts may result in electric
shock.
§
Only trained operating personnel may dis-
connect the appliance.
§
Disconnect the appliance and secure it
against reconnection.
