4 | Structure and function
AHT Cooling Systems GmbH | en
40 / 84
417632_2_0820
– Rate current and consumption
– Refrigerant and quantity used
– Net content
– Date of manufacture
– and further technical data
*Examples of climate classes:
Climate class
(class) accord-
ing to ISO
23953-2
Ambient tem-
perature [°C]
Relative humid-
ity [%]
3
25
60
3.3
Use as intended
The appliance is intended for the display of packaged,
deep frozen food products or access to them by cus-
tomers.
For more information, see
4
Structure and function
The appliance is supplied ready for use and has its
own control unit.
The appliance is pre-programmed ex works.
The appliance contains one or more hermetically
sealed refrigerant circuits whose components are per-
manently and technically tightly connected to each
other.
The design of the individual appliance models may
vary.
An appliance group consists of several individual ap-
pliances and is built in a modular design.
A partition wall may be required between the individual
appliances.
1
2
5
4
8
3
6
7
Fig. 1:
Overall view of appliance
1
Control and display ele-
ments,
temperature display
2
Display shelf with
bracket
3 Sticker
4 Foot panel
5
Mesh basket with remov-
able bracket
6 Plastic panel
7 Door
8 Door seal
The appliance is equipped with display shelves and
mesh baskets.
Number, position and depth of the display shelves/
mesh baskets according to the loading specification
The appliance is equipped with doors.
The doors are equipped with a self-closing mechan-
ism.
Door self-closing mechanism
The door closes by itself as of a specific angle.
Appliance models with brine circuit
The waste heat generated in the appliance is trans-
ferred to the external unit via a brine circuit.
NOTICE
Material and property damage due to use of
non-approved components.
§
The connection to a brine circuit for cooling is per-
mitted only on appliances of the manufacturer
AHT.
Appliance models with additional designation AIR
The waste heat generated in the appliance is trans-
ferred to the ambient air via a liquefier.
The appliance is equipped with Plastic panel.
NOTICE
Material and property damage due to missing
parts on the appliance.
§
Operating personnel must check the presence of
the Plastic panel.
Presence of the plastic screen is a prerequisite for cor-
rect functioning
of the appliance.
1
Fig. 2:
Plastic screen (1)
The appliance is equipped with stickers
.
– Power rating plate
[see
– Loading specification
[see
– Symbol
The stickers are located at the top right inside the ap-
pliance.
Inspection tasks
– Presence of the stickers
– Presence of the plastic screen
– Function of the self-closing mechanism on the
doors
