AHT Cooling Systems GmbH | en
Control and display elements | 5
417632_2_0820
41 / 84
Responsibility
– Operating personnel
Frequency
See Maintenance
[see
If any parts are missing or in the event of a malfunc-
tion, contact the maintenance service immediately
[see
.
4.1
Automatic defrosting
The appliance features automatic defrosting.
The frequency, duration, and time of defrosting are
preset.
Defrost time
– Up to 60 min
Display
During automatic defrosting, the following display
screen and symbols appear on the display
[see
Display
Symbol
The water produced with defrosting is collected in a
collection tray (base tray with drain
[see
) and drained off via a defrosting
water drain
.
CAUTION
Leakage of condensation water.
Slipping hazard.
§
Check for puddles in front of and under
the appliance.
§
Promptly remove leaking condensation
water.
§
Contact the maintenance service immedi-
ately
.
During the defrosting process, an increase in the tem-
perature can occur on the internal temperature dis-
play.
4.2
Automatic appliance lighting
The appliance lighting can, for example, be coupled to
the market lighting.
Control by external day/night signal.
Technical data
[see
Day mode function
If the day mode is switched on, the appliance lighting
is automatically on.
Night mode function
If the day mode is switched off, the appliance lighting
is automatically off.
5
Control and display
elements
5.1
Temperature display
The temperature of the appliance is set in the factory
so that the optimal product temperature is maintained
within the standardised product temperature class.
To ensure optimal storage of the food, it is recommen-
ded that you maintain this setting.
Changes in the temperature settings can lead to spoil-
age of the food.
Internal appliance temperature display (air
temperature)
The temperature display is located at top left of the
goods area.
Fig. 3:
Interior temperature display
Check of internal temperature
Responsibility
– Operating personnel
Frequency
See Maintenance
5.2
Operating elements and
display indicators
The operating elements and display indicators are loc-
ated at the top left of the goods area.
Fig. 4:
Operating elements
Keys are available as control elements, with the fol-
lowing assignments:
Key
Function
Acknowledge acoustic alarm
Optional
Key
Function
Switch the cooling function on
and off
Activate temporary daytime op-
eration
(appliance lighting on)
