23
Useful
Functions
Handling
Data display
Data number
display
Operation mode
indicator
1·3
2
2
Monitor Items
When the
“Monitor mode”
is selected, the following items can be checked.
∗
1: Nos. 0, 2, and 3 indicate a temperature detected with each thermistor.
When the relevant thermistor is not connected or has a wire break, “99.9” is displayed.
∗
2: “0” is displayed.
∗
3: With the factory setting, “J” is displayed. However, it is for indication only. Actual communication is enabled when the optional expansion
communication board is mounted.
No.
Description
Note
∗
1
–
–
–
∗
2
∗
3
–
∗
1
∗
1
–
0
5
6
7
8
9
1
2
3
4
When the data number is changed, the temperature
currently detected with the thermistor and input/output
values simultaneously appear on the data display.
Machine temperature [Th5]
Not used
Room temperature [Th3]
Tank liquid temperature [Th4]
Not used
Not used
Capacity command value (%)
Compressor inverter rotation speed (rps)
Not used
Status of expansion DIN (third digit)/DOUT (first digit)
• Go to the monitor mode with the key.
See “
Mode changing operation
” on page .
• The “MONITOR” lamp on the operation mode indicator lights.
∗
The value on the data number display blinks.
• Press the key two times, to return to the normal mode.
See “
Mode changing operation
” on page .
• The “NORMAL” lamp on the operation mode indicator lights.
1. Select the monitor mode.
2. Monitor the current status.
3. Return to the normal mode.
Operating procedure
Change the value on the data number display to a desired
value with the or key.
17
17
PIM00132A_EN.fm 23 ページ ２００７年９月２０日 木曜日 午後３時４分
