4 Operation
User reference guide
14
EA23DA6V(7)+9W
Daikin Altherma 3 H F
4P556076-1A – 2021.09
2
Select the correct gas price.
3
Confirm the changes.
INFORMATION
Price value ranging from 0.00~990 valuta/kWh (with 2
significant values).
To set the electricity price
1
Go to [7.5.1]/[7.5.2]/[7.5.3]:
User settings
>
Electricity price
>
High
/
Medium
/
Low
.
2
Select the correct electricity price.
3
Confirm the changes.
4
Repeat this for all three electricity prices.
—
INFORMATION
Price value ranging from 0.00~990 valuta/kWh (with 2
significant values).
INFORMATION
If no schedule is set, the
Electricity price
for
High
is
taken into account.
To set the electricity price schedule timer
1
Go to [7.5.4]:
User settings
>
Electricity
price
>
Schedule
.
2
Program the selection using the scheduling screen.
You can set the
High
,
Medium
and
Low
electricity
prices according to your electricity supplier.
—
3
Confirm the changes.
INFORMATION
The values correspond with the electricity price values for
High
,
Medium
and
Low
previously set. If no schedule is set,
the electricity price for
High
is taken into account.
About energy prices in case of an incentive per
kWh renewable energy
An incentive can be taken into account when setting the energy
prices. Although the running cost can increase, the total operation
cost, taking into account the reimbursement will be optimized.
NOTICE
Make sure to modify the setting of the energy prices at the
end of the incentive period.
To set the gas price in case of an incentive per kWh renewable
energy
Calculate the value for the gas price with the following formula:
▪ Actual gas price+(Incentive/kWh×0.9)
For the procedure to set the gas price, see
13].
To set the electricity price in case of an incentive per kWh
renewable energy
Calculate the value for the electricity price with following formula:
▪ Actual electricity price+Incentive/kWh
For the procedure to set the electricity price, see
Example
This is an example and the prices and/or values used in this
example are NOT accurate.
Data
Price/kWh
Gas price
4.08
Electricity price
12.49
Data
Price/kWh
Renewable heat incentive per
kWh
5
Calculation of the gas price
Gas price=Actual gas price+(Incentive/kWh×0.9)
Gas price=4.08+(5×0.9)
Gas price=8.58
Calculation of the electricity price
Electricity price=Actual electricity price+Incentive/kWh
Electricity price=12.49+5
Electricity price=17.49
Price
Value in breadcrumb
Gas: 4.08 /kWh
[7.6]=8.6
Electricity: 12.49 /kWh
[7.5.1]=17
4.7.3
Using and programming schedules
About schedules
Depending on your system layout and installer configuration,
schedules for multiple controls may be available.
You can…
See…
Set if a specific control needs to act
according to a schedule.
"
Activation screen
" in
Select which schedule you currently want to use for a specific
control. The system contains some predefined schedules. You can:
Consult which schedule is currently
selected.
"
Schedule/Control
" in
Select another schedule if needed.
"To select which schedule
you currently want to
use"
Program your own schedules if the
predefined schedules are not
satisfactory. The actions you can
program are control specific.
▪ "
Possible
actions
"
in
▪
"4.7.4 Schedule screen:
Example"
To select which schedule you currently want to use
1
Go to the schedule for the specific control.
See "
Schedule/Control
15].
Example:
For the schedule for the desired room
temperature in heating mode, go to [1.2]
Room
>
Heating schedule
.
2
Select the name of the current schedule.
Mon
Sat
Wed
Fri
Thu
Tue
Sun
User defined 1
3
Select
Select
.
Delete
Rename
Select
4
Select the schedule that you currently want to use.
