6 Finishing the outdoor unit installation
Installation manual
15
EPRA14~W1
Daikin Altherma 3 H HT
4P586100-1 – 2019.07
Install the upper part of the discharge grille
NOTICE
Vibrations.
Make sure the upper part of the discharge
grille is attached seamlessly to the lower part to prevent
vibrations.
4
Align and attach the left side.
5
Align and attach the middle part.
6
Align and attach the right side.
5
4
6
7
Insert the hooks.
8
Insert the ball studs.
8
7
9
Fix the 6 remaining screws.
9
6×
6.3
To remove the discharge grille,
and put the grille in safety position
WARNING
Rotating fan.
Before powering ON or servicing the outdoor
unit, make sure that the discharge grille covers the fan as
protection against a rotating fan. See:
▪
"6.2 To install the discharge grille" on page 14
▪
"6.3 To remove the discharge grille, and put the grille in
safety position" on page 15
1
Remove the upper part of the discharge grille.
4×
2
Remove the lower part of the discharge grille.
4×
3
Rotate the lower part of the discharge grille.
4
Align the ball stud and hook on the grille with their counterparts
on the unit.
