4 Operation
User reference guide
17
EGSQH10S18AA9W
Daikin Altherma ground source heat pump
4P351749-1D – 2016.09
To copy from one day to another
1
Select the day from which you want to copy and press
.
Example:
Monday.
2
Select Copy day and press
.
3
Set the days you want to copy to Yes and press
.
Example:
Tuesday = Yes, Wednesday = Yes, Thursday = Yes and Friday
= Yes.
To save the schedule
1
Press
, select Save schedule and press
.
2
Select User defined 1, User defined 2 or User defined 3 and
press
.
3
Change the name and press
. (Only applicable for room
temperature schedules).
Example:
MyWeekSchedule
4.7.4
Predefined schedules: Room temperature
+ leaving water temperature (main)
: Desired temperature = Preset value (Comfort)
: Desired temperature = Preset value (Eco)
Predefined 1
Mon - Fri
07:00 09:00
17:00
23:00
Sat - Sun
23:00
08:00
Predefined 2
Mon - Fri
07:00 09:00
17:00
12:00
23:00
14:00
Sat - Sun
23:00
08:00
Predefined 3
Mon - Sun
23:00
08:00
4.7.5
Predefined schedules: Leaving water
temperature (additional)
: Additional zone = On
: Additional zone = OFF
Predefined 1
Mon - Fri
07:00 09:00
17:00
23:00
Sat - Sun
08:00
23:00
Predefined 2
Mon - Fri
07:00 09:00
17:00
12:00
23:00
14:00
Sat - Sun
08:00
23:00
Predefined 3
Mon - Sun
08:00
23:00
4.7.6
Predefined schedules: DHW tank
temperature
a
: Start production of domestic hot water. Desired DHW tank
temperature = Preset value (Storage comfort)
b
: Start production of domestic hot water. Desired DHW tank
temperature = Preset value (Storage eco)
Predefined 1
Mon - Sun
a
b
:00
Predefined 2
Mon - Sun
a
b
:00
:00
Predefined 3
Mon - Fri
a
b
:00
Sat - Sun
a
b
:00
:00
4.8
Weather dependent operation
In space heating control, the leaving water temperature setpoint
mode can be:
▪ Fixed
▪ Weather-dependent (the leaving water temperature is determined
automatically depending on the outdoor temperature)
To select the setpoint mode, see the installer reference guide.
To set the parameters for the weather-dependent curve, see below.
4.8.1
To set the weather dependent settings
Prerequisite:
You switched the permission level to Advanced end
user.
1
Go to [7.7]:
> User settings > Set weather dependent.
2
For main leaving water temperature zone [7.7.1], modify with
,
,
,
, and confirm with
.
3
If applicable, for additional leaving water temperature zone
[7.7.2], modify with
,
,
,
, and confirm with
.
Set weather-dependent heating
d
c
Ta
Tt
a
b
T
t
Target leaving water temperature
T
a
Outdoor temperature
a
Low outdoor ambient temperature
b
High outdoor ambient temperature
Summary of Contents for ALTHERMA
Page 23: ......
