Si10-416_B
ARC433 Series
Operation
367
• Before bed...
2.Use as a favorite mode.
NOTE
Set the unit to HOME LEAVE
Operation before leaving the living
room when going to bed.
The unit will maintain the
temperature in the room at a
comfortable level while you sleep.
When you enter the living room in the
morning, the temperature will be just right.
Disengaging HOME LEAVE Operation
will return the temperature to that set
for normal operation. Even the coldest
winters will pose no problem!
Once you record the temperature and airflow rate settings you
most often use, you can retrieve them by pressing HOME LEAVE
button. You do not have to go through troublesome remote
controller operations.
• Once the temperature and air flow rate for HOME LEAVE
operation are set, those settings will be used whenever
HOME LEAVE operation is used in the future. To change
these settings, please refer to the “Before using HOME
LEAVE operation” section above.
• HOME LEAVE operation is only available in COOL and HEAT
mode. Cannot be used in AUTO, DRY, and FAN mode.
• HOME LEAVE operation runs in accordance with the
previous operation mode (COOL or HEAT) before using
HOME LEAVE operation.
• HOME LEAVE operation and POWERFUL operation cannot
be used at the same time. Last button that was pressed has
priority.
• The operation mode cannot be changed while HOME LEAVE
operation is being used.
• When operation is shut off during HOME LEAVE operation,
using the remote controller or the indoor unit ON/OFF switch,
“ ” will remain on the remote controller display.
