Si12-714
Instruction
Operation Manual
135
2.9
ECONO Operation
FTKD 25/35 D
ECONO Operation
ECONO operation is a function which enables efficient operation by lowering the maximum power con-
sumption value.
To start ECONO operation
1. Press “ECONO button” .
• “
” is displayed on the LCD.
To cancel ECONO operation
2. Press “ECONO button” again.
• “
” disappears from the LCD.
NOTE
• ECONO Operation can only be set when the unit is running. Pressing the operation stop
button causes the settings to be canceled, and the “
” disappears from the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power
consumption of the outdoor unit (operating frequency).
• ECONO operation functions in COOL and DRY modes. The fan strength does not change
in ECONO operation.
• POWERFUL operation and ECONO operation cannot be used at the same time.
Priority is given to POWERFUL operation.
• Power consumption may not drop even if ECONO operation is used, when the level of
power consumption is already low.
TEMP
ON/OFF
POWERFUL
MODE
FAN
SWING
QUIET
SENSOR
ECONO
MOLD PROOF
TIMER
ON
CANCEL
OFF
1, 2
