IM 1038 • VAV ACTUATOR ROOM SENSOR 2
www .DaikinApplied .com
I
ntroductIon
I
ntroductIon
Revision History
Publication
Date
Release Notes
IM 1038
March 2010
Initial Release
Reference Documents
Publication Company
Title
Source
www .
DaikinApplied .
com
Limited Warranty
Consult your local Daikin representative for warranty details . To
find your local Daikin representative, go to
www .DaikinApplied .
com .
Notice
Copyright © 2010 Daikin Applied, Minneapolis MN . All rights
reserved throughout the world . Daikin Applied reserves the
right to change any information contained herein without prior
notice . The user is responsible for determining whether this
software is appropriate for his or her application .
® ™ The following are tradenames or registered trademarks of
their respective companies: BACnet from the American Society
of Heating, Refrigerating and Air-Conditioning Engineers,
Inc .; Windows from Microsoft Corporation; D-Net, Daikin and
MicroTech III from Daikin Applied .
General Information
This manual contains the information you need to install the
BACnet
®
VAV Actuator on a VAV box .
Hazard Identification Messages
CAUTION
Cautions indicate potentially hazardous situations, which can
result in personal injury or equipment damage if not avoided .
WARNING
Warnings indicate potentially hazardous situations, which can
result in property damage, severe personal injury, or death if
not avoided .
DANGER
Dangers indicate a hazardous situation which will result in
death or serious injury if not avoided .
NOTICE
Notices give important information concerning a process,
procedure, special handling or equipment attributes .
DANGER
Electric shock hazard . Can cause personal injury or
equipment damage.
This equipment must be properly grounded . Connections and
service to the MicroTech III Chiller Unit Controller must be
performed only by personnel knowledgeable in the operation
of the equipment being controlled .
CAUTION
Static sensitive components . Can cause equipment damage .
Discharge any static electrical charge by touching the bare
metal inside the control panel before performing any service
work . Never unplug cables, circuit board terminal blocks, or
power plugs while power is applied to the panel .
NOTICE
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with this instruction manual, may cause interference to radio
communications . It has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of the
FCC rules . These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment . Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at his or her own expense .
Daikin Applied
disclaims any liability resulting from any interference or
for the correction thereof .
